A UPS is one of those purchases that feels like overkill right up until the moment it is not. The question is not really whether uninterruptible power is nice to have. It is whether anything in your house would actually be damaged or lost by the power cutting out mid-write, and whether the specific unit you are looking at would prevent that.
This covers what a UPS genuinely protects against, the three types and why the cheapest is fine for most homes, and how to size one without guessing.
Quick Facts
- A UPS protects against outages, sags, surges and brownouts. The last two do more cumulative damage than full outages.
- Home units are rated in VA and watts. Watts is the number that matters; the VA figure is always higher and is not directly comparable.
- Line-interactive is the right type for almost every home and small office. Online double-conversion is overkill and noisy.
- Runtime is minutes, not hours. A UPS is there to let things shut down safely, not to keep you working through an outage.
- Never plug a laser printer into a UPS. The fuser draws enough on warm-up to trip it.
What it actually protects against
Full outages are the obvious one, and in most of the UK they are rare and brief. The real risk is not the loss of power itself but what a NAS or a desktop was doing when it happened. An interrupted write to a file system or a RAID array can cause damage that outlasts the outage by a long way.
Sags and brownouts are more common and more damaging over time. The voltage dips rather than disappearing, often when something with a large motor starts up nearby. Power supplies cope, but repeated dips shorten their life, and a system can reboot without you ever seeing a light flicker.
Surges are brief over-voltage events. A surge protector handles these on its own, and every UPS includes surge protection, but a surge strip alone does nothing about the other two.
The three types
| Type | How it works | Suits |
| Standby (offline) | Passes mains through, switches to battery on failure | Single PC, router, minimal budget |
| Line-interactive | Adds automatic voltage regulation to correct sags without using battery | Almost every home and small office. The sensible default |
| Online double-conversion | Always runs from the inverter, zero transfer time | Servers, lab equipment, poor mains supply. Noisy and expensive |
Line-interactive is the one to buy. The automatic voltage regulation is the meaningful upgrade over standby. It corrects mild sags without draining the battery, which is what most real-world power problems actually are.
Sizing it without guessing
Two numbers matter: the load in watts, and the runtime you need. Get the load right first.
Quick Steps
- Add up the wattage of everything you intend to plug into the battery-backed outlets.
- Use a plug-in power meter for real figures. Power supply ratings are maximum capacity, not actual draw.
- Add around 25% headroom so the UPS is not running at its limit.
- Check the unit is rated in watts, not just VA. Roughly, watts is about 0.6 to 0.9 times the VA figure.
- Check the runtime chart at your load. Runtime falls away steeply as load increases.
A typical home setup. A NAS, a router and a small switch. Draws perhaps 60 to 90 watts in total. A 900VA / 540W line-interactive unit will run that comfortably for a good half hour, which is far more than you need for a clean shutdown.
A desktop PC with a monitor is a different proposition, perhaps 200 to 350 watts under load, and the same UPS might give you five to ten minutes. That is still enough to save your work and shut down properly, which is the actual goal.
What to plug in, and what not to
- Yes: NAS or home server. This is the strongest case there is. An interrupted array write is genuinely damaging.
- Yes: router, modem and switch. Keeps your internet up during a brief cut, and lets a NAS notify you.
- Yes: desktop PC and one monitor, if you work on it.
- Yes: a home CCTV recorder, which is otherwise blind during exactly the wrong moment.
- No: laser printers. The fuser draws a large surge on warm-up and will overload the unit.
- No: anything with a heating element or a compressor. Heaters, kettles, fridges.
- No: a games console, unless you enjoy paying for battery capacity you will never use usefully.
Most units have two banks of sockets. Battery-backed plus surge, and surge only. Non-critical things go in the surge-only bank so they do not consume runtime.
The part people forget. The shutdown
A UPS with no data connection is only half a solution. Connect it to your NAS or PC by USB and configure the shutdown behaviour, or the battery will simply run flat and you get an unclean shutdown a few minutes later than you would have anyway.
Synology, QNAP, TrueNAS and Unraid all support common UPS models natively. Plug in the USB cable, enable UPS support and set a threshold. On Windows, the unit will appear as a battery and you can set behaviour under Power Options, or use the manufacturer software for more control. On Linux, nut or apcupsd does the job and can shut down several machines from one UPS.
Set the trigger sensibly. Shut down when the battery reaches around 30% or after five minutes on battery, rather than waiting until it is nearly empty. A shutdown that does not complete is no better than no shutdown at all.
Gear We Recommend
Power protection matters most for the storage it sits in front of. Here is the storage and backup kit we recommend.
Browse our Storage and Backup picks on AmazonAs an Amazon Associate, TechyGeeksHome earns from qualifying purchases
Living with one
Batteries are consumable. Expect three to five years from a sealed lead-acid pack, less in a warm cupboard, and note that most units let you replace the battery for far less than the cost of a new UPS. Run the self-test occasionally, and take the beeping seriously. The alarm pattern for a failing battery is different from the one for being on battery power, and the manual explains which is which.
Glossary
| Term | What it means |
| UPS | Uninterruptible Power Supply. A battery-backed unit providing power during interruptions. |
| VA | Volt-amperes, the apparent power rating. Always higher than the watt rating. |
| AVR | Automatic Voltage Regulation. Correcting mild sags without using the battery. |
| Brownout | A sustained drop in mains voltage rather than a complete loss. |
| Transfer time | How long the unit takes to switch to battery, in milliseconds. |
| Double conversion | An always-on inverter design with effectively no transfer time. |
| Pure sine wave | An output waveform matching mains, needed by some modern power supplies. |
Frequently asked questions
Do I really need a UPS at home?
If you run a NAS, a home server or CCTV, the case is strong. An interrupted write can damage data rather than just losing it. For a desktop with everything in the cloud, a decent surge protector is often enough.
How long will a UPS run my equipment?
Minutes, not hours. A typical home unit gives five to thirty minutes depending on load. The purpose is a safe shutdown or riding out a brief cut, not continuing to work through an outage.
What is the difference between VA and watts?
VA is apparent power and watts is real power. Watts is the figure to size against; VA is always the larger and more marketable number. A rough conversion is watts equals VA multiplied by 0.6 to 0.9.
Can I plug a laser printer into a UPS?
No. The fuser draws a very large current on warm-up and will overload most home units, either tripping them or shortening the battery life considerably. Use a surge-only socket instead.
Do I need a pure sine wave output?
Increasingly, yes. Some modern power supplies with active power factor correction do not tolerate the stepped approximation used by cheaper units, and may shut down when the UPS switches to battery. If in doubt, buy pure sine wave.
Disclosure: this post may contain affiliate links. If you buy through one of them, we may earn a small commission at no extra cost to you. We only recommend products we’ve tested or genuinely rate.
Discover more from TechyGeeksHome
Subscribe to get the latest posts sent to your email.